Maritime Solutions Maritime Solutions

Cargo Barge 27.43m Single Hold

GBP £60,000

Dimensions: Length 27.43m | Beam 5.3m

Description: Very good condition single hold steel welded barge. Has a clear hold with a metal floor which was replaced in full, recently. Originally used for grain on the canal network. There is forward and aft compartment that are accessed via hatched from the deck. The barge has been modified at the stern to easily attached to a pusher barge. The pusher boat is also available for sale. Currently has two hiab units fitted and a power pack but these can be removed if not required. Currently the Hiab 110 sea carne is working with the Lister 3-cylinder hydraulic powerpack. The Atlas Hiab has not yet been piped up to the system. There has been a stern modification to allow the coupling of the pusher tug or can be towed. The original tiller remains. The cranes were used for the clearance of waste and small skips from ships and quaysides. If not wanted these can be removed.

Currently located on the Medway and by negotiation with the yard owners any conversion works may be carried out by new owners on the yard and there is the possibility of a permanent mooring.

Can still be commercially used or make ideal conversion to a houseboat.

Location: Medway

27.43m Open Single Hold Barge
27.43m Open Single Hold Barge
27.43m Open Single Hold Barge
27.43m Open Single Hold Barge
27.43m Open Single Hold Barge
27.43m Open Single Hold Barge
27.43m Open Single Hold Barge
27.43m Open Single Hold Barge
27.43m Open Single Hold Barge
27.43m Open Single Hold Barge
27.43m Open Single Hold Barge
27.43m Open Single Hold Barge
27.43m Open Single Hold Barge
27.43m Open Single Hold Barge
27.43m Open Single Hold Barge